How To Connect Fly12 To Computer
Asked by: Ms. Prof. Dr. Julia Müller Ph.D. | Last update: March 13, 2021star rating: 4.2/5 (34 ratings)
How do I use Fly12?
Getting Started with your Fly12 CE Connect your device to a USB wall charger (not supplied) using the supplied USB cable. The charge indicating light will illuminate showing that the device is charging. When the device is fully charged the LED will illuminate green.
How do I turn on Fly12?
Turning on your Fly12 CEPress and hold the power button for approximately 1 second until power on chime is heard, then release. Power level 'beeps' will [] Turning off your Fly12 CEPress and hold the power button until the power off chime is heard. Power level 'beeps' will sound, signalling the battery status [].
How do I watch videos on Fly12?
Plug your Fly6 CE or Fly12 CE's microSD card into a microSD adapter, then insert into the Apple Lightning to SD Card Camera Reader. You'll be able to view your video files through the 'Photos' app. You can also open CycliqPlus mobile app to edit your videos.
How do I start recording in Cycliq?
To turn the Fly12 CE on and start recording, press and hold the power button for at least 2 seconds. Upon powering on, the Fly12 CE will play a power up sequence of beeps followed by up to 4 beeps to indicate battery level.
What does the Q button do on Cycliq?
Pressing the Q button will toggle through the brightness of the bike light, while pressing the power button toggles through light modes; constant, pulse, flash or camera only. Other settings can be customised through the CycliqPlus mobile app or desktop app.
How do you reset fly 12?
Open your Fly12 CE USB/SD card cover. With the use of a fine object (eg paper clip or eject pin for smartphone SIM tray), press the reset button as illustrated below. You will know that this is done correctly as you will feel the reset button being depressed.
How do I reset my Cycliq Fly6?
How to reset the Fly6 Generation 3 with deep sleep mode Ensure the Fly6 Generation 3 is turned off. Hold down the Q button for 30 seconds. The LED will flash white. Release the Q button. The LED may flash blue. Wait 30 seconds. Tap the Power button once to complete this action. Wait 30 seconds.
How do I connect my Garmin to Cycliq?
Open your Garmin EDGE and once it loads up, swipe down from the topmost part of the EDGE screen to access the quick menu. Click on the “Sensors” button to open up the Sensors settings. Click on “Add Sensor”.
How do I download a video from Fly6?
Insert your Fly6 CE SD card into an SD adapter (if required), then insert into an SD card reader that works with your phone. You'll be able to view your video files via the standard gallery app on your phone (eg: 'Gallery' or 'Photos'), as well as copy over the videos you want to save.
How can I download videos from Cycliq?
To save your video to your computer, select 'export' and choose the relevant settings. You will be prompted to name your exported video and will be notified when this process is complete.
