- 1. Socket is a computer networking term that describes a connection between a host computer and a network adapter.
- 2. In most cases, sockets are used to send and receive data, but they can also be used to connect to printers or other devices on the network.
- 3. Sockets are created by opening a port in the firewall or router that the host computer is connected to.
Basics of Networking – 3 – Introduction to Sockets
What is socket and its types?
Socket is a generic term for a communication port that can be used for both data and voice transmissions. The most common types of sockets are TCP/IP sockets, which are used for internetworking communications, and USB sockets, which are used to connect peripherals like keyboards and mice to computers.
What is a socket What is it used for?
A socket is a network connection between two devices. It is a type of communication between two computers or servers that is bidirectional, meaning they can transmit messages between each other. Sockets are used to transmit information such as data, messages, and files.
What is difference between port and socket?
A port is a specific type of address that you can send and receive data on. A socket is a connection between two computers or devices that allows information to be sent back and forth.
What are the 5 different types of socket?
There are five different types of socket: electrical, mechanical, optical, thermal, and radio frequency. The electrical socket is used to connect an electric device to the power source. The mechanical socket is used to connect a mechanical device to the power source. The optical socket is used to connect an optical device to the power source. The thermal socket is used to connect a thermal device to the power source.
Is socket A protocol?
Socket A protocol is a communications protocol used in the transport layer of the TCP/IP suite. It is responsible for the delivery of datagrams, which are used to transport messages between hosts on an internetwork.
What is socket programming in Java?
Socket programming in Java is the process of creating a connection between a client and a server. This can be done over the internet, or locally on the same device. Socket programming is used for a variety of tasks, including network communications, file transfers, and data input and output.
What is a socket Cisco?
A socket is the component that connects an electronic device to the circuit board. It has two parts: the socket and the connector. The socket is a metal or plastic body that the device is plugged into, while the connector is a metal or plastic piece that fits into the socket.
What is difference between socket and HTTP connection?
Socket is an asynchronous connection between two computers. The client sends a request to the server and the server creates a response and sends it back to the client. HTTP is a synchronous connection between two computers. The client sends a request to the server, and the server waits for the response before sending back any data.
What is the difference between socket and connection?
Socket is a system-level communication mechanism. It allows processes to communicate with each other using standard network protocols, such as TCP/IP.
Connection is a lower-level communication mechanism that allows processes to communicate with each other using specific types of messages. For example, a connection can be established in order to pass data between two processes.
What is socket in transport layer?
Socket is an in-memory object that is used to store and manage the connection between two programs. It is used by the transport layer to encapsulate packets of data and to route them between endpoints.
What is a socket bit?
A socket bit is a tiny component that is used to communicate with other sockets. It is composed of a small coil of wire, which typically has six or eight windings. When a voltage is applied to the wire, it will produce a magnetic field. This magnetic field will then be translated into a current that can be transmitted through the wire.
How many socket types are there?
There are two types of sockets. One is a plain socket, which is connected to a computer or other electronic device, and the other is a USB socket, which is used to connect to devices like printers and scanners.
How is a socket measured?
A socket is measured in terms of inches. It is a unit of length, and it is equal to 1/2 foot. The distance between two points on a surface, or between two parts of a surface, is measured in terms of sockets.
What is socket pipe?
Socket pipe is a technology that allows an application or computer to communicate with another application or computer without having to install additional software. It does this by using a socket to create a dedicated connection between the two applications.
What does a socket consists of?
A socket consists of a physical connection between two devices (computers, phones, etc.). The devices are connected by a wire or a cable, and the socket is the opening where the wire or cable goes in. The socket is usually a small, round hole that has been made in the device.
How do you create a socket?
There are a few ways to create a socket. One way is to use the socket() function, which takes two arguments: a protocol (e.g. TCP or UDP) and a file descriptor (e.g. 1). The second way is to use the bind() function, which takes three arguments: a protocol, a file descriptor, and a sockaddr structure.
What is socket programming C++?
Socket programming in C++ is the process of writing code that allows an application to create and manage connections with remote hosts. Socket programming can be used to send and receive data, as well as control the flow of data between the application and the remote host.
What is socket programming with TCP?
Socket programming with TCP is the use of sockets to communicate between two or more processes. Sockets allow communication to take place between processes on the same computer, or between two or more computers on the same network. This type of communication can be used for various purposes, such as to exchange data between processes or to send a command to a process.
How do you use sockets in Java?
There are a few ways to use sockets in Java. One way is to create a socket connection and then use the socket’s send() and receive() methods to send and receive data. Another way is to create a ServerSocket object and use the accept() method to wait for connections from clients.